MEK

DIY Kit Bus board for A-100 / MOTM systems for installation in rack enclosure 84TE
- 14 slots for A-100 system
- 12 slots for the MOTM [...]

Kit to build a Colorsond(R) Tremolo. You need only two Knobs for shaft with 6,35mm and a max. diameter of 23mm, if used a 1590B enclosure and a [...]

Kit to build a optical compressor. Needed becomes a case of min. 1590B, NSC1290 and 2 knobs for pots with 6,35mm shaft with max. diameter of [...]

Level: Advance

Kit to build a digiatal reverb with the BTDR-3 chip. Controls Hall decay, tone and mix. Are required only 3 knobs with max [...]

Kit to build a DC-DC converter from 12V DC to 37 to 450V for low currents. The adjustable output voltage depends on the current drawn.
Inductur [...]

Kit to build digital delay with the HT8955A and 256K Dram. You need only 3 knobs for shaft 6.35mm (1/4") and a enclosure e.g. 1590BB.
Using the [...]

Kit to build digital delay with the famous PT2399 Chip. Pump charge 9--> 18V on board. You need only 3 knobs for shaft 6.35mm (1/4") and a enclosure [...]

Kit to build digital delay with the famous PT2399 Chip with a tap tempo function. Pump charge 9--> 18V on board. You need only 3 knobs for shaft [...]

Kit to build a Distortion Pro V1. You need only 6 knob's for 6.4mm shaft and a max. diameter of 20mm (if used a predrilled enclosure) and a enclosure [...]

Kit to build a Distortion Plus (Ge-Version). You need only 2 knobs (1/4") and a enclosure.


Inhalt:

1x 3PDT switch
1x Mono [...]

Kit to build a boogie rectifier emulation . You need only 6 knobs(with a max. diameter of 16mm- 6.4mm shaft) if use a enclosure 1x6 pots, or max. [...]

Kit to build a dual true bypass/ looper box. You need only a enclosure.


Include:

2x 3PDT switch
5x Mono jack 1/4" [...]