MEK

PCB for building a Wah. single sided, drilled, soldering mask, silk screen. Dimension 70x55mm.

Kit to build a silicon linear booster. You need only a knob (1/4") and a enclosure e.g. 1590A or greater.
Can't powered by a battery if used a [...]

PCB for building a linear booster in a 1590A enclosure. Single side, drilled, soldering mask, silk screen. Dimension 35x34.5mm.

PCB for building a bass overdrive "Bass Amuser" of the thread at the musikerboard.
Single side pcb with silkscreen, dimension : [...]

Sold out!!
Level: Advanced

Attention: this kit is not a beginners project! The voltages can +/- 60V DC and more, and are absolutely [...]

PCB for building a digital delay with HT8955A and DRAM. Delay time approx 0.8ms. Double side pcb, silkscreen, soldermask.
Dimension: [...]

Kit to build digital delay with the HT8955A and 256K Dram. You need only 3 knobs for shaft 6.35mm (1/4") and a enclosure e.g. 1590BB.
Using the [...]

PCB for building a Ze(h)ndrive. Single side pcb, silkscreen, soldermask.
Dimension: 46x36mm.

Preprogrammed CHIP with TAP function for the PT80 delay or other circuits with PT2399 and 50K time pot., case DIP8

Level: Advance

Material composition for the bass overdrive "BassAmuser" from the musicians Board. All components incl. Hammond 1590BB raw [...]

PCB for building a Unicord SuperFuzz. Single side pcb, silkscreen, soldermask.
Dimension: 56.40x43.50mm.

Level: Advance

Kit to build a digiatal reverb with the BTDR-3 chip. Controls Hall decay, tone and mix. Are required only 3 knobs with max [...]