MEK

Module for the construction of an amplifier up to 100W.
Prefabricated and tested DMOS amplifier module.
Single-sided PCB with silkscreen, [...]

Kit to build a Tap tempo module with LED for the PT-80 delay.
You need only a SPST, SPDT or DPST switch momentary
You can use it also with [...]

Kit to build a dual true bypass/ looper box. You need only a enclosure.


Include:

2x 3PDT switch
5x Mono jack 1/4" [...]

Kit to build a mosfet booster with an max. gain of 12-20dB. You need only a enclosure of min. 1590B, 27134 or [...]

Kit to build a treblele booster. Needed becomes only a knob (1/4") and a enclosure.


The treble booster unit is an essential component [...]

Kit to build a germanium treble booster. Negative ground, Millenium bypass circuit on board. You need only a kno (1/4") and a [...]

Kit to build a Tap tempo module with LED for the PT-80 delay.
You can use it also with Rebote 2.0, Rebote 2.5, Madbean Cave dweller, Mad [...]

Kit to build a silicon linear booster. You need only a knob (1/4") and a enclosure e.g. 1590A or greater.
Can't powered by a battery if used a [...]

Kit to build a Colorsond(R) Tremolo. You need only two Knobs for shaft with 6,35mm and a max. diameter of 23mm, if used a 1590B enclosure and a [...]

Kit to build a Brian May booster (MBQ) from an idea by JD. Sleep and GGG. You need only 1 knob (1/4") and a ensclosure e.b. 1590B or [...]

Kit to build a mini booster by J. Orman with an max. gain of 20dB. Needed becomes a case of min. 1590B, NSC1290 and 2 knobs for pots with 6,35mm [...]

Kit to build a DOD250 distortion. Grey version 1979. Millenium bypass circuit on board. Needed becomes only knob's (1/4")and a case.
Decals [...]