MEK

Kit to build a Big Muff (triangle). Millenium bypass circuit on board. You need only 3 knob's (1/4") and a [...]

Kit to build John Hollis Zombie Chorus. Needed becomes only 3 knob's for shaft with a diameter of 6,35mm (max. diameter 23mm) and a case e.g 1590BB [...]

Kit to build a extern parallel loop for effects with blend and +20dB boost.
internal doubling of the operating voltage to approx. 16V DC
. [...]

Kit to build a Dynacomp clone. You need only a enclosure e.g. 1590B, 27134PLSA, 1550B or GEH013 and 3 Knobs for shaft [...]

Kit to build your own Ze(h)ndrive clone. You need only 4 Knobs(max. diameter to 20mm/ shaft 6,35mm - 0.25\" for a 1590B predrilled enclosure)and a [...]

Level: Advance

Kit to build a Zentaurus Rev 1.22. You need only 3 Knobs for shaft 6.35mm(max. diameter to 24mm/ shaft 6,35mm - 0.25"))and a [...]

Level: Advance

Kit to build a Plexiclone. You need only 5 knobs for 6.4mm shaft with a max. diameter of 20mm if used the template for the [...]

Kit to build Opto-FET-Bypass like a Voodoo Lab Bypss

Contents:

1x DPDT switch
1x socket DIP6
1x HF111M
1x LED 3mm [...]

Kit to build a DC-DC converter from 12V DC to 37 to 450V for low currents. The adjustable output voltage depends on the current drawn.
Inductur [...]

Kit to build a SuperOverdrive SOD-44. You need only a enclosure and 3 knobs for pots with 6,35mm shaft with a max. diameter of 20mm
Decals [...]

Kit to build a mosfet booster with an max. gain of 12-20dB. You need only a enclosure of min. 1590B, 27134 or [...]

Kit to build a mini booster by J. Orman with an max. gain of 20dB. Needed becomes a case of min. 1590B, NSC1290 and 2 knobs for pots with 6,35mm [...]